Geithain RL906D Ash Veneer Black

The same design with the RL 906 RL 906D has an AES3 interface that allows the transmission of digital audio signals. An input selector switch on the back of the unit, the left and right channels are reproduced individually or together. As with all our speakers continue to supply analog audio signals is possible. A 16 step rotary switch, to delay the digital audio signal which allows synchronization with the TV picture to TV broadcasts. By default, a default frame rate is 50 Hz, with a level equivalent to 20 ms. Internally, different frequencies can be programmed.
The RL 906D is the most compact studio monitor of our RL series. Its dimensions make it ideal for near-field, for use in the mobile unit, as directed by small speakers for audio and video studios as well as 5-channel applications. Like its bigger brothers, the active two-way studio monitor is built into our special coaxial technology that allows for sound compatibility, so that an exchange between OB and inpatient studio during a production run is not a problem - we have set our ambition to the sound image of the entire series to make almost uniform. Also, the acuity of focus and a minimum phantom sound sources makes the RL 906 comparable to the larger speakers in the RL series. Direction and directivity were designed to result in smaller base width and Nahfeldbetrieb the speakers can be run at right angles to Abstrahlebene, so do not have to be angled inward toward the listener. This offers significant advantages such as the parallel installation to video screens during the installation in OB vans.

Technical Data Area


Loudspeaker for digital
TV applications in small voice,
Video and film studios as well as for near-field,
OB, surround sound systems Maximum 110 dB / r = 1m Frequency range 50 Hz .. 20 kHz ± 3 dB Calibration: Acoustic output level
for PE = -14 dBu
> 76 dB, r = 1m directivity in the range of
200 Hz .. 10 kHz
from 1.5 to 11 dB Inherent noise sound level <= 7 dB (A) / r = 1m Total harmonic distortion measured at 83 dB, r = 1m
in the range 150 Hz .. 10 kHz
> = 40 dB nominal level analog input 6 kOhm dBu adjustable Input impedance analog> = 10 / symmetrically Electronic Crossover frequencies
3 kHz nominal power output of the
MOSFET output stage
Bass
Tweeter

80 Watts at 4 Ohms
40 watts into 8 ohm input jack for AES3 XLR 3F / analog input selector
for jack

For more information, please visit this products webpage.