Audio Technica AT4022

Audio Technica AT4022

Product information "Audio Technica AT4022"

The Audio-Technica AT4022 Omnidirectional Condenser Microphone features a low-profile design and small-diaphragm condenser element. The sensitivity, frequency response and SPL capabilities make it a suitable choice for speaker cabinets, vocals, percussion instruments, drums and "spot" placement on guitars, stringed instruments, etc.

The omnidirectional polar pattern provides a wide pickup area and preserves the integrity of the signal. An 80Hz high-pass filter switch reduces low frequencies and all associated noise. In addition a -10dB Pad switch provides added headroom and minimizes distortion when capturing transient (peaking) audio signals.


Omnidirectional Polar Pattern
The omnidirectional polar pattern provides a generous pickup area and effectively preserves the integrity of the audio quality.
Switchable 80Hz High Pass Filter
The 80Hz high-pass filter switch eliminates hum and low frequency noise, rumble, etc.
-10dB Pad Switch
A -10dB Pad provides additional headroom for capturing peaking audio signals without distortion and noise.
Fixed-charge back plate, permanently polarized condenser
Polar Pattern
Frequency Response
20Hz - 20kHz
Dynamic Range (Typical)
132dB, 1kHz at Max SPL
Signal-to-Noise Ratio
80dB, 1kHz at 1Pa
Maximum Input Sound Level
146dB SPL, 1kHz at 1% T.H.D.;
156dB SPL, with 10dB pad (nominal)
Power Requirements
48VDC, 3.0mA typical
Output Impedance
250 ohms
Output Connectors
3-pin XLR
Low Frequency Roll-Off
Dimensions (LxDiameter)
5.67 x 0.83" (144 x 21mm)
119g (4.2 oz)

For more information, please visit this products webpage.

Upload in progress, please be patient ...