Product information "Dangerous Music Convert-2"
The new Dangerous Music CONVERT-2 is an audiophile Reference Grade Stereo D/A Converter. It's the logical improvement of the now legendary DAC-ST and the further developed versions of it in D-Box and Source. And it once again raises the bar.
The CONVERT series was designed from ground up with a zero-compromise attitude. Decades of accumulated knowledge and experience combined with the Dangerous Music core philosophie "transparent, yet musical" leveraged to a truly exceptional converter: profoundly detailed, with a richly defined low end and an unparalleled clarity that holds true across the entire audio spectrum.
An important feature too rare with pure D/A-Units is the bi-directional USB-connectivity. When acting as an interface (CONVERT-2 receives the signal to be converted via USB), the other direction (meaning the USB-input) is fed by the "AES-2" Input.
Second important feature: A volume pot for directly connecting speakers. Turned fully clockwise it is taken entirely out of the signal path via a relay / switch. This is better when utilizing an external Monitor Controller like the Dangerous Music Monitor ST.
Features:
- Audiophile Mastering Front End Playback Conversion
- 5 Digital Input Formats: USB, AES, SPDIF, ADAT, Optical SPDIF (Toslink)
- Sampling Frequencies from 44.1 bis 192 kHz with automatic detection
- High Definition Stereo Reference Monitoring
- extremely low jitter clock that will send many dedicated studio masterclocks to retirement
- USB Input for Direct DAW Connectivity
- "USB digital pass through": When switched to USB the elsewise unused USB-Input receives the AES-2 Input
- Compatible with Monitor ST/SR for Remote Switching
- extreme precise Metering (Peakmeter) taken from the Dangerous Master
- digital thru for connecting an external Metering
Safety Warnings: | Die spezifischen Sicherheitshinweise für das Produkt sind in dessen Bedienungsanleitung aufgeführt. |
---|
Dangerous Music
Dangerous Music,
701 S Mountain Rd, New City, New York 10956, US
https://www.dangerousmusic.com/
MasteringWorks GmbH
Raderbergerstr.175
50968 Cologne
Germany
info@masteringworks.com
www.masteringworks.com
Note: Dangerous Music, Inc. publishes actual measured specifications, not theoretical numbers derived from data sheets published by chip manufacturers.
- Signal to Noise Ratio, A-weighted, 20Hz to 20KHz: < 114dB
- Signal to Noise Ratio, unweighted, 20Hz to 20KHz: < 113dB
- Dynamic Range, A-weighted, 20Hz to 20KHz: < 114dB
- Dynamic Range, unweighted, 20Hz to 20KHz: < 113dB
- THD+N: THD+N, 1kHz, unweighted, 20Hz to 20kHz, +4dBu out: < 94.5dB (0.00188%) THD+N, 1kHz, unweighted, 20Hz to 20kHz, +22dBu out: < 106.5dB (0.00048%)
- Frequency Response @ 96KHz sample rate: DC to 20KHz: +0, -0.25dB DC to 30KHz: +0, -0.5dB DC to 40KHz: +0, -1.0dB
- Jitter: 16ps (100Hz to 40KHz), 18ps (100Hz to 1MHz)
- Crosstalk rejection: > 114dBu @ 1kHz
- Replacement Fuses: USA 2 amp slo-blow for 120V Europe 1 amp slo-blow for 240V
*JetPLL: JET and Jitter Elimination Technology are trademarks of TC Applied Technologies Ltd. JET is patented technology used under sublicense from TC Applied Technologies, and is the intellectual property of Sonopsis Ltd.