Neumann BCM 104
Experience flawless sound with the Neumann BCM 104. Ideal for speech, music, and studio recordings. Your go-to large diaphragm condenser microphone.
Features
- Large-diaphragm condenser capsule
- Cardioid directional characteristic
- Characteristic, functionally optimized design*
- Integrated pop protection
- Integrated elastic suspension
- Individual headgrilles for different users
- Colored rings to identify the replacement headgrilles
- Easy removal and cleaning of microphone headgrille (with bayonet mount)
- Mechanical compatibility with standard studio boom arms
- Internal switches: high-pass and pre-attenuation
Product information "Neumann BCM 104"
The BCM 104 is ideal for the faithful reproduction of speech and music. This is due, for instance, to the frequency response that is flat up to 3 kHz and then gradually boosted in the higher frequencies. If required, internal switches can be used to compensate for the proximity effect and to reduce the sensitivity by 14 dB. The versatility of the BCM 104 can be seen in its wide range of applications, from news, to round-table discussions, to radio plays, to musical recordings.
| Safety Warnings: | Die spezifischen Sicherheitshinweise für das Produkt sind in dessen Bedienungsanleitung aufgeführt. |
|---|
Neumann
Georg Neumann GmbH
Leipziger Str. 112 10117 Berlin
https://www.neumann.com
Sennheiser electronic SE & Co. KG
Am Labor 1 DE - 30900 Wedemark Deutschland
contact@sennheiser.com
- Acoustical operating principle Pressure gradient transducer
- Directional pattern Cardioid
- Frequency range 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm 22 mV/Pa
- Sensitivity at –14 dB attenuation 4.4 mV/Pa
- Rated impedance 50 ohms
- Rated load impedance 1 kohms
- Equivalent noise level, CCIR1) 18 dB
- Equivalent noise level, A-weighted1) 7 dB-A
- Maximum SPL for THD 0.5%2) 138 dB
- Maximum SPL for THD 0.5% with preattenuation2) 152 dB
- Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 76 dB
- Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 87 dB
- Maximum output voltage 10 dBu
- Dynamic range of the microphone amplifier (A-weighted) 131 dB
- Supply voltage (P48, IEC 61938) 48 V ± 4 V
- Current consumption (P48, IEC 61938) 3.2 mA
- Matching connector XLR3F
- Weight 500 g
- Diameter 64 mm
- Length 85 mm
- Height (without suspension) 110 mm