Royer Labs Sling-Shock Microphone shock Mount RSM-SS1

The all new Sling-Shock™ (patent pending) is a revolutionary departure from traditional shock mount designs. We've done away with the rubberized parts and elastic cords, producing a durable shock mount that gives superior isolation from vibrations.

In the Royer tradition, the Sling-Shock is hand-built in our Burbank, CA facility using only the finest materials.

Our proprietary system of non-resonant nylon cable and damped steel springs acts to isolate the microphone from vibrations induced from the microphone stand. These vibrations can appear as rumble and/or low-grade noises which create disturbances across the bandwidth, from low end thumps to harmonic disturbances at different frequencies. The Sling-Shock's superior vibration-reduction capabilities and lack of self-resonance allow engineers to capture performances free of vibration-related interference across the bandwidth.

The Sling-Shock RSM-SS1 is sized to fit Royer's 1-inch diameter R-121, R-122, R-122V, SF-1 and SF-12 ribbon microphones. Any cylindrical microphone measuring approximately one inch in diameter (+/- 1/8 inch) will work with the model RSM-SS1. Future models will accommodate Royer's larger bodied microphones and microphones of all sizes.

A European stand-adapter is included, allowing the Sling-Shock to be fitted to European specification microphone stands.

Sling Shock Features:

• Superior isolation from vibration and shocks
• Felt-lined, scratch-free microphone chamber holds mic securely
• No rubberized parts to degrade or stretch
• Flexible for easy microphone positioning
• Five year unconditional warranty

Optional SS-C Vibration Suppression Cable

Low-level vibrations can be transferred through the mic cable and into the microphone. A simple strain relief loop is suggested to minimize cable related vibration.

If a greater degree of isolation is required, we offer the SS-C Vibration Suppression Cable. This 2-foot (.6 meter) male-XLR-to-female-XLR link cable is comprised of cloth-covered wire and connects between the microphone and the microphone stand, eliminating cable-related vibration when the highest degree of vibration suppression is required.

SS-C Vibration Suppression Cable, for maximum isolation