Designed for smaller speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.
5.1”x6”/13x15cm Short: 2.7”/8cm Tall: 8”/20.3cm 20 lbs/9kg
Designed for medium size speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.
6.1”x7.5”/15.5x19cm Short: 2.9”/9.5cm Tall: 8.75”/22.5cm 40 lbs/18kg
Designed for larger speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.
7.8”x10”/20×25.4cm Short: 3.5”/12.5cm Tall: 8.75”/22.5cm 60 lbs/27.2kg
Designed for subwoofers. These stands provide superior isolation and bring out the real “punch” in the bass and a clearer more accurate sound.
7.8”x10x5”/20×25.4×12.5cm 75 lbs/34kg
The ultimate levitation damper – Set 4 pcs.How it works Place them under your record player, cd/dvd player or under your speakers and isolate your equipment from feedback. Neolev magnetic levitation dampers are our latest development. Placed under CD/DVD players, turntables, speakers etc., they eliminate acoustic feedback and mechanical distortion to bring out the full potential of your equipment. Cancellation of contact induced resonance is very effective as forces perpendicular to the device are never transferred. Based on two repelling Neodium magnets one single NeoLev lifts up to 8kg. NeoLev's are adjustable to ensure perfect levelling. Sonic improvements from NeoLev damping feet Higher resolutionIncreased soundstageGreater dynamic rangeImproved transient responseMore clearly defined bass Applications TurntablesSpeakersCD/dvd playersPreampsPower amps
Lightweighted fixation frame developed to hang 4 acoustic panels on the wall.
It is easy to mount and it allows the exchange of panels from the frame, which can be used with panels made out of VicPET Wool, M1 and EPS.
Lightweighted fixation frame developed to hang 3 acoustic panels on the wall. It is easy to mount and it allows the exchange of panels from the frame, which can be used with panels made out of VicPET Wool, M1 and EPS.
This accessory is composed by a round metal plate, that must be glued to our products and a magnet that should be screwed to the wall. It is recommended to use the rubber cap to prevent the acoustic panel to slide.
Easy and fast to install, you just need to screw the VicFix Metallic into the wall, and hang the acoustic panels. Perfect for VicPET Wool and M1 Foam products.
€30.00*
This website uses cookies to ensure the best experience possible. More information...