Funk Tonstudiotechnik LAP2.V4-S ANALOGUE LINEAR PRE AMPLIFIER and PHONES AMPLIFIER
Experience high-end audio with the Funk Tonstudiotechnik LAP2.V4-S. An analog pre-amplifier and top-tier headphones amp for unrivaled sound neutrality.
Features
- RECORD signal selection from max. 6 audio signals
- MONITOR signal selection from max. 6 audio signals
- RECORD signal distribution 1 to 4
- level adjustment to different unit outputs
- impedance conversion from high to low impedance outputs
- Very powerful headphone output including mute relay
- power-down mute relay on monitor outputs
- saving the input selection after switching off the unit
- muting of the main outputs (monitor) possible
Product information "Funk Tonstudiotechnik LAP2.V4-S ANALOGUE LINEAR PRE AMPLIFIER and PHONES AMPLIFIER "
The LAP-2.V4-S is both an ultralinear pre-amplifier
and headphone amplifier for the small recording
studio as well as the high-end user who demands
sound neutrality. The unit is equipped with a
powerful headphone amplifier, additional ESD
protection at all inputs and outputs, RK27 volume
control with further optimised balance synchronisation and a power supply with increased current
delivery capability. The integrated headphone
amplifier is one of the best-quality developments in
its class. The basic amplification of the 6 analogue
stereo inputs can be adjusted separately internally.
| Safety Warnings: | Die spezifischen Sicherheitshinweise für das Produkt sind in dessen Bedienungsanleitung aufgeführt. |
|---|
Funk Tonstudiotechnik
FUNK TONSTUDIOTECHNIK
GERMANY · 10318 BERLIN · BLOCKDAMMWEG 39-59 Tor 2
funk@funk-tonstudiotechnik.de
https://funk-tonstudiotechnik.de/
- Frequency response : 2 Hz...200 kHz < ± 0,3 dB 6 Hz ...100 kHz < ± 0,01 dB
- Phase response : 20 Hz ...20 kHz ± 2° absolutely 20 Hz ...20 kHz ± 0,1° relatively
- THD non-linear distortion 1 kHz +6 dBu : < 0,00003 % (< -130 dB) < 0,00003 % (<; -130 dB) at +18 dBu Level
- THD+N non-linear distortion + noise 1 kHz +6 dBu : < 0,00018 % -115 dB (BW 22 kHz), at 20 Hz..20 kHz <; 0,00035 % (BW 80 kHz)
- Input/input crosstalk attenuation : 1 kHz > 118 dB 10 kHz > 102 dB
- Noise level MONITOR-OUT unweighted : -109,0 dBu (BW 20 Hz..22 kHz eff. Gain = 0,0 dB, Volume to max.)
- Dynamic MONITOR OUT (S/N) volume max. (0dB): 137.0 dB "A" weighted rms, 134 dB CCIR 468 unweighted 20 Hz-22 kHz
- Maximum input and output level : +25,0 dBu !
- Headphone amplifier max. power at 1 kHz : 2x 1600 mW /62 Ω (THD+N -121 dB or 0.00009% at full power)
- Dimensions and weight :210 mm x 172 mm x 42 mm (width x depth x height), 1,5 kG